Additional Specifications:
Conductivity of DM water is <10μ S/cm at 25ºC
PH of DM water is 8.5 - 9.5.
Max Pressure 2.5 kg/cm2.
Aqua DM-XL Series
For item number of the model, kindly refer page no.88

Applications :

DM plants can be used where good quality water of low conductivity is required. In general the DM water can be used for the following:

As feed water to Distillers: For longer life of the equipment and to obtain high purity distillate, demineralised water can be used as feed water to distillers.
In Laboratories & Research Institutes
In Food & Diary Industries
In Breweries & Textile Units
In Chemical Industries
In Pharmaceutical Industries
In Electronic Industries
In Storage Battery Industry & many more

Note:

	•	Output is based on 250 ppm TDS
	•	Raw water should be free from turbidity, free chlorine, heavy metals,organic matter, oil and should be at ambient temperature.
	•	The treated water is not bacteria / pyrogen free.
	•	A = Analogue model, D = Digital model (with respect to conductivity meter for DM plant).
	•	Customised DM plants are also made. Suitable plants can be recommended based on the raw water analysis.

Lab DM 200

LAB DM 200
The new Lab DM 200 is a two bed portable De-ioniser, which produces demineralised water that is substantially free from, dissolved solids at flow rate up to 10 ltrs/hr. This particular model can be wall mounted / Table top design.

The design of DM 200 is such that the service and regeneration is very simple. This is an ideal model to all laboratories where the usage of DM water is minimal or it can be used as feed to distillers.