Cutting Saw - Table Model
Horizontal Plane - Grinding Machine
Specifications: |
Electric Power |
560 Watts |
Operation |
220 Volts,Single Phase,50 Hz |
Grinding Disc Diameter |
300mm |
Trough dimensions |
500mm |
Machine Weight |
80 kgs (approx) |
|
|
GRINDING MACHINE - TABLE MODEL
The equipment is heavy duty with space saving design and with
built in electric motor. The grinding spindle runs on ball bearings
with morse taper 3. The spindle speed is adjustable by a variable
speed pulley/ by frequency drive
Features:
- Solid welded construction, stress relieved.
- Precision hardened and ground, morse taper 3 collett for
accommodating tapered grinding tools for ground joints.
- Equipped with variable speed pulley/ frequency drive.
- 1/2 HP (360 watts), 230 volts single phase AC, 50Hz.
- Equipment can be clamped on table or can be mounted on
anti vibration rubber
Applications:
- Suitable for grinding ground joints/ball joints.
GRINDING MACHINE - HORIZONTAL PLANE
The machine is made up of solid welded construction put on
antivibration rubber mounts. The grinding disc is made of high
quality gray iron casting, is driven by a flange-mounted motor
vertically mounted. Speed is steplessly variable.
The coupling between the motor and the grinding disc is through
an intermediate flange with labyrinth seal. The spindle is supported
on taper roller bearings and carries a seal to prevent grit and
other media from getting into the bearings. The grinding trough
is made of fibreglass with provision to drain. The machine is also
equipped with a support lever for precision and angular grinding
of glass.
Applications:
Equipment is suitable for laping, grinding and polishing of hard materials.
|